banner
News center
Constant good quality, on-time delivery and sincerity to customers

Waste slag benefits for correction of soil acidity

Nov 02, 2023

Scientific Reports volume 12, Article number: 16042 (2022) Cite this article

1297 Accesses

2 Citations

Metrics details

The global trend is to find new materials with improved environment friendly. The sustainable development of 2030 AGENDA and Waste Management Legislation sustain the disposal of a large quantity of slag at landfill sites by causing environmental consequences which has drawn attention to the need for its more effective recycling. Heavy industries have been operating in the Galati area for over 30 years and an ecological education is necessary for an efficient management of waste slag. The agricultural land resources are an issue world-wide and through this investigative study we showed that the mixture of blast furnace slag and waste slag dumped in landfill can help remediation of the soil acidity and increasing the crop yield. The chemical, structural and morphological properties of three investigated different slag samples are evaluated for recycling in agriculture. Results indicated that the obtained mixture of the slag waste dumped in landfill and of granulated metallurgical slag shows its usage in saving the affected lands. Therefore, by elemental analysis determined by X-ray fluorescence analytical equipment, the optimum weight ratio for the composition of soil-slag mixture were achieved. The obtained mixture presents a balance between soil pH = 5.2 corresponding to a medium acid soil and slag pH = 12.5 which corresponds as strongly basic character which is beneficial in amelioration process of acidic soils for the improving of soil characteristics.

In the past, steel industries were designed to produce steel of a specific quality and quantity, without any monitorization in environmental protection, which led to the increase of higher volume of by-products (slag). The disposal of a large quantity of slag at landfill sites caused environmental consequences which has drawn the attention to the need for its more effective recycling1. Furthermore, the land filled with dumped slag has become an important source of pollution of environmental factors which for-wards adversely affects human health from the perspective of cardiovascular and respiratory health problems2,3,4.

The various waste slags that are emerged from steel plants are blast furnace slag (BFS) and Linz-Donawitz (LD) converter slag. The composition of these slags differs depending on the source of generation but consists of oxides such as silica, alumina, iron, lime, and magnesia5. For many years, due to the rapid growth of industrialization, the quantity of metallurgical slag deposited in slag storing yards, occupied farmland and silted rivers has reached to enormous amounts6.

Over the past decade, the increased number of environmental regulations corroborated with rising costs and decreasing capacity at landfills have forced the steel industries to minimize the waste disposal and to find ways to resource recovery and reuse of waste slags. Nowadays, the slags coming from blast furnace and steelmaking processes are considered marketable products used in cement, roadbed material, ground improvement material, civil engineering material, fertilizer and only a small percentage is processed as waste in landfills. During the production of steel, one ton of slag waste is generated per every ton of stainless steel produced7. One important contribution in saving of natural resources, CO2 emissions reduction and energy consumption reduction consists in sustainable use of slags to form a society founded on the recycling practice. The principal objective of the program HORIZON 2020 of the EU is to recover and recycle resources from metallurgical wastes and to support friendly ecological economy8,9,10.

Particularly, the largest Integrated Steel Plant of Galati, located in South-East Romania, is a leader in manufacturing metallurgical products, with a current production capacity of 3 million tons of steel per year as well as the ability to increase that output in the future. With a history from 1968 the Steel Plant of Galati, with a surface area of 1600 ha, when had a production for over 8 million tons of steel/year and 12,000 of employees. The Slag Dump of Steel Plant of Galati has a surface area of 110 ha and an occupied capacity of 70 million tons of slag. The Slag Dump was closed in 2009, but the waste slag was not recycled and currently has a height of 60 m.

The slag wastes dumped in landfills cannot be directed to material, raw material, or chemical recycling due to their high heterogeneity. Also, the authors11 evaluated the chemical and significant geotechnical parameters of slag collected from a metallurgical landfill as the alternative materials used in roads construction. In previous research we studied about the re-use of slag with application in industrial sector with material and environmental benefits12.

Agricultural acid soils (pH value less than 7) have low fertility, poor physical, chemical, and biological properties which seriously affect the crops yield13. Soil acidity can cause molybdenum, calcium, and magnesium deficiency in plants and de-creases phosphorous availability14. Because the land resources are limited, it is necessary to pay attention to the correction of soil acidity and to the increase of the crop yield. In Japan and Europe steel slag is used as soil amendment agent since it contains a variety of trace elements on its surface, such as Cr and V, which are not readily released in slag. Also, the presence of Ca2+ on the surface of steel slag produces stable potentially toxic element (PTE) ions, with the purpose to immobilize PTE ions from contaminated soil15,16. Wen et al.17 showed that applying steel slag onto PTE acidic mining soils effectively increases the soil pH and soil microbial abundance and immobilizes PTE ions which provide a desirable plant survival climate. Popescu et al.18 investigated three sources of ladle furnace (LD) slag from Romanian steel plants with characteristics regarding steel manufacturing and storage of LF slag which exploit them as environmentally friendly secondary resources to obtain materials for improving acidic soils. Anger et al.19 investigated the effects of ladle furnace slag presence on soil properties, and they concluded that the use of ladle furnace slag for acid soil remediation is effective with a positive influence on soil characteristics, leading to increased crop yield. Mihalache et al.20 concluded that the waste resulted from secondary refinery of the steel can be use with good results in agriculture, with positive influences on the maize crop and as amendment for correction acidic soil reaction, and the slag from the steel industry brings increases of calcium and micronutrients in soil content. Fan et al.21 concluded that the use of slag as a fertilizer can decrease Cr, Cu, Pb and Zn in acidic soils and indicated that the slag could be used in PTE pollution control for plants and the environment. The researchers22 investigated the feasibility of using BOF slag for degraded land remediation in two different ways: as liming material and as amendment nutrient source and they showed that as the slag content increases, the mobility of some basic nutrients such as Mg decreases, so an addition of more than 25% is not recommended. Dongfeng Ning et. al.23 carried out a pot experiments to assess the effect of application rates of steel slag on improving soil acidity and silicon-availability to demonstrate the effects of steel slags on the immobilization of heavy metals in contaminated soil, to test the impacts of slag application on rice productivity and metals accumulation and they concluded that steel slag was an effective amendment for soil acidity adjustment, plant silicon nutrition and stabilization of Cd in acidic soils.

From perspective of waste directive 2008/98/EC (EUR-LEX, 2018) regarding the strategic goal of EU to a complete elimination of the disposal of municipal wastes one of the objectives of the present research is to reuse the slag waste dumped in landfills.

The aim of the study was to improve the pH of acidic soil (5.2) using a mixture formed by slag waste dumped in landfill and of granulated blast furnace slag. The novelty of our research consists in the usage of a part of the slag dumped in landfill without any selective separation by source of slag which is a costly process but also, solving an important environment issue regarding decommissioning of slag dump in amelioration of soil acidity.

The FTIR spectra of granulated blast furnace slag (Sample 1), waste slag dumped in landfill (Sample 2) and combination of both 50% granulated blast furnace slag + 50% waste slag dumped in landfill (Sample 3) are presented in Fig. 1.

FTIR spectra of slag samples.

By analysing the spectrum (detailed figure) in the range of 700–1100 cm−1, it can be found that there are obvious absorption peaks in the spectrum of all the slag samples. The granulated blast furnace slag shows the characteristic absorption bands at 3640, 1418, 980, 944, 861, 753 and 710 cm−1. The band at 3640 cm−1 is assigned to the stretching vibration of the hydroxyl group originated from the weakly absorbed water molecules on the slag surface24. The characteristic absorption bands at 1418, 861 and 710 cm−1 are ascribed to the asymmetric stretching mode and bending mode of carbonate group, respectively and the band at 980 cm−1 are attributable to the stretching vibrations of Si–O25. The band at 944 and 752 cm−1 represent the internal vibration of [SiO4]4− and [AlO4]5− tetrahedral and comes from Si (Al)–O-antisymmetric stretching vibration26.

The different vibration modes for the sample of waste slag can be observed in the FTIR spectrum. The absorption bands shown are at 1418, 873, 712, 667 and 419 cm−1. The peak at 1418 cm−1 is assigned to the asymmetric stretching mode and bending mode of carbonate group. Calcite phase is confirmed by characteristic peaks at 712 cm−1 (ʋ2 out of plane bending vibration of the CO3−2 ion) and 873 cm−1 peak (ʋ2 split in-plane bending vibrations of the CO3−2 ion27. Calcium aluminate phase is identified by characteristic peak at 419 cm−128. Peak around 667 cm−1 is described as absorption band for different M–O (metal oxide) such as Al–O, Fe–O, Mg–O etc.29.

In the case of combination of both 50% granulated blast furnace slag and 50% waste slag dumped in landfill the intensity of absorption peaks is smaller in comparison with Sample 1 and Sample 2 of slag. The characteristic absorption peaks (978 and 753 cm−1) which correspond with characteristic peaks of Sample 1 are shifted compared to the Sample 1, assigned to the stretching vibrations of Si–O and to the Si (Al)–O-antisymmetric stretching vibration, respectively, can provide important evidence of chemical interaction between Sample 1 and Sample 2. The decrease of the intensity of the bands appearing at 875 and 709 cm−1 cans be attributed to overlapping the vibrations of the CO3−2 ion from calcite phase.

Figure 2 presents the SEM micrographs of the slag samples (Sample 1–3). One can see the characteristic morphology- the sizes and the forms of the slag samples.

SEM images of slag samples.

At larger magnifications it can be observed that the surface is rough and uneven, and one can notice rounded grain-like rugged formations. The slag samples display aggregated particles with average diameter of a few microns. Also, in these rounded formations it can be seen different morphologies like spheres, rods, boards specific each compound/phase from metallurgical slags.

Figure 3 illustrates the EDX elemental analysis of granulated blast furnace slag (Sample 1), waste slag dumped in landfill (Sample 2) and combination of both 50% granulated blast furnace slag + 50% waste slag dumped in landfill (Sample 3).

EDX elemental map of slag samples.

One can observe that the predominant elements in the examined area are constated in carbon, oxygen, calcium, and iron, confirming the FTIR spectra.

Figure 4 shows EDX spectra of slag samples recorded on different selected punctual area, to obtain more information about the elemental composition of specific areas. For all the tested slag samples have similar elements content.

EDX spectra analysis of slag samples.

The selected punctual areas are highlighted thus: the spheric structure are with yellow line and the structure like boards are with green line for all the analysed slag samples. In the case of Sample 1 for both structures the values of chemical elements present are similar and the silicon has a higher value at spheric structure which can be correlated with the presence of silica (SiO2). The higher content of calcium reveals that the Sample 1 is blast furnace slag dominated by calcium and silicon compositions. In the case of slag dumped in landfill (Sample 2) the content of carbon increase for both structures and some chemical elements like titanium, barium, manganese doesn`t appear in EDX spectra and the explanation for this phenomenon is that the slag was dumped in landfill for more than 30 years. One can observe for combination of both 50% granulated blast furnace slag + 50% waste slag dumped in landfill (Sample 3) that the values of all the chemical elements for both spheric and board-like structure are between the first two samples, confirming the FTIR spectra regarding chemical interaction between Sample 1.

XRD patterns of the slag samples with the phases identified are shown in Fig. 5. Sample 1 show minor peaks of free CaO and MgO, which may be deleterious and cause reduction in strength. The phases and amorphous contents of the Sample 1 granulated blast furnace slag are broadly consistent with literature30. Sample 3 of slag consists of crystalline phase – Ca2Mg2SiO7, Ca2Fe2AlO5, CaCO3 and CaO as observed by the XRD analysis. In terms of the relations of phase thermal equilibrium, the compounds identified form an isomorphic series of melilites that is specific to basic metallurgical slags.

X-ray diffraction patterns of slag samples.

In Table 1 are presented the values expressed as ppm of chemical element detected in slag samples (Sample 1, 2 and 3).

The results show a large quantity of calcium in all three samples of slag. Also, the elements detected such as Fe, Al, Mg and Si are in accordance with XRD spectra.

The chemical composition of the major elements that compound the soil, soil- slag and slag samples was determined by XRF. The values expressed as ppm of chemical elements are presented in Table 2. In the case of soil sample the content of the main constituents is iron, titanium, manganese, and potentially toxic elements (PTE) such as arsenic, zinc, copper, and cobalt. For soil-slag 1 with weight ratio soil: slag (1:1) it can be observed the disappearance of the potentially toxic elements (PTE) founded in soil sample and the decrease of concentration value of zinc. When the weight ratio of slag increases at 3 (soil-slag 2 sample) the values of main component increased in accordance with values of slag sample, but in the case of soil-slag 3 sample where the weight ratio of soil is bigger (3) it can be observed the cobalt presence. Based on these XRF results we can say that take place an elimination of potentially toxic elements in contaminated soil by applying slag in a bigger proportion.

With the aid of a pH meter, CONSORT C 533 the important parameters of soil and slag solutions were measured as: the pH, conductivity, and the salinity, as shown in Table 3. The data presented in Table 3 suggest that the soil sampled has the pH = 5.2 corresponding to a medium acid soil, which does not sustain a high fertility and is not able to offer proper conditions for crops. Also, the pH of soil has important influence on soil fertility, decreases the availability of essential elements and the activity of soil microorganisms which can determine calcium and magnesium deficiency in plants and decreases phosphorous availability. The pH value of slag solution (12.5) corresponds as strongly basic character which is beneficial in amelioration process of acidic soils and the presence of this type of slag sustain the improving of soil characteristics, too. For the soil-slag samples the pH value increase with the increasing of the weight ratio of slag and the mixtures soil-slag obtained can be framed into the category of weakly alkaline soils.

The data given in Table 4 show that the humidity of soil is bigger and decreases in soil-slag samples with adding of slag content. The values of total soil-slag porosity are between 40 and 50% and depends on the density and apparent density of the soil being influenced by the mineralogical composition, the content of organic matter and the degree of compaction and loosening of the soil, the crystalline structure of soil minerals.

Considering the structural and morphological characterization of the investigated slag samples we propose a recipe of blast furnace slag and of waste slag dumped in landfill in accordance with the waste directive 2008/98/EC regarding the strategic goal of EU to a complete elimination of the disposal of wastes. The slag dump of Steel Plant of Galati has an enormous quantity of unused waste slag which may be mixed with granulated blast furnace slag, to save the natural resources used as raw materials in the metallurgical technological process.

The presence of Ca2+ in the composition of the slag can maintain high alkalinity in the soil for a long time in the natural environment. The alkaline pH of the soil may contribute to a decrease the available concentration of heavy metals by reducing metal mobility and bonding metals into more stable fractions. One of the objectives of this research is improving the quality of the environment by using the mixture between two different slags on agricultural lands and reintroducing them in the agricultural centre, especially in acid soils. Acidic soils are characterized by an acidic pH that has spread in recent years due to excessive fertilizers or far too aggressive work31. The production is significantly influenced, and the treatment of acid soils is usually done using a series of natural materials (lime, dolomite), the consumption being approx. 20 t/hectare depending on the acidity of the soil and the nature of the plants grown on the respective surfaces.

Our research consists in improving the characteristics and qualities of the acidic soils and helping to reintroduce it into the agricultural circuit by transforming a waste into a new material friendly-environmental, the mixture of blast furnace slag and waste slag dumped in landfill.

In this research, the slags were collected from the largest Integrated Steel Company of Galati. The Galati Steel Plant produces a wide range of quality flat products (plates, coils, galvanized sheets & coils, and organic coated products) as well as welded tubular products and supplies, for customers across Romania, the Balkans and elsewhere in Europe.

The types of slag used for characterization were granulated blast furnace slag (Sample 1) and waste slag dumped in landfill (Sample 2). The slags were coarse in size, and it were crushed and milled in different size fractions in the range 1.25 mm–71 μm.

The granulated blast furnace slag is obtained by water quenching method when at the high temperature range 1250–1650 °C of blast furnace slag is conventionally treated in cold water by forming a non-crystalline granular material that differs from the source to source in function of the quality of the raw material used and the method of production. The waste slag dumped at the Galati Steel Plant landfill that was used for this study represents a significant source of pollution because it is not recycled. Following the results obtained of the samples enumerated above, we saw the benefits regarding of each sample and we made a new recipe of a combination of both 50% granulated blast furnace slag + 50% waste slag dumped in landfill (Sample 3) for the obtaining new trends and to recycle the slag dumped in enormous quantities. The granulated blast furnace slag taken immediately after cooling in water, with water addition was mixed with waste slag dumped in landfill, which previously was crushed with a mortar grinder to obtain Sample 3. The combination of obtained slag (Sample 3) was used in soil-slag mixture for correction of soil acidity.

The topsoil (0–0.25 m) was sampled from a commune of Galati County of Romania, (no specific permissions were required for soil sampling in this location and the field in this study did not involve endangered or protected species). The collected soil was crushed and milled in different size fractions. The soil and the new recipe of the combination of the two types of slags (Sample 3), mentioned above, were combined in different proportions, to prepare 3 mixtures, illustrated in Fig. 1, with weight ratio soil: slag such as 1:1 (Soil -slag 1), 1: 3 (Soil-slag 2) and 3: 1 (Soil-slag 3). The photo images of soil-slag samples are presented in Fig. 6.

Images of mixtures of soil-slag samples.

FTIR spectroscopy is a well-established technique for elucidating the structure of glassy and crystalline aluminosilicates (aluminosilicate glasses and zeolites respectively). Fourier transform infrared (FTIR) spectra of the slag samples were recorded using a NICOLET IS50 FT-IR SPECTROMETER (THERMO SCIENTIFIC) equipped with a built-in ATR accessory, DTGS detector and KBr beam splitter. The scan range was set of 4000–400 cm−1 with a resolution of 4 cm−1 and the number of scans was 32 times. The reference taken for the background spectrum before each sample was air and the ATR plate was cleaned with ethanol solution after each spectrum. To verify that no residue from the previous sample remained, a background spectrum was collected each time and compared to the previous background spectrum. The FT-IR spectrometer was placed in a temperature-controlled (21 °C) air-conditioned chamber.

The morphology and elemental composition of the investigated slag were examined by scanning electron microscopy coupled with energy dispersive X-Ray (SEM/EDX) spectroscopy using a FEI Q 200 MICROSCOPE IN LOW VACUUM. Before examination, the samples were coated with 4 nm thick conducting layer of Au using a SPI-Module sputter coater system.

X-ray diffraction spectra (XRD) were recorded using the DRON 3 EQUIPMENT (BOUREVESTNIK INC., ST. PETERSBURG, RUSSIA) and a Cobalt anode (Co, λKa = 1.790300 Å, with setting of: voltage (U) of 30 kV and an intensity (I) of 20 mA, with a step of 0.05 o/s and a range between 20 and 65-degree time exposure of 3 s, and total time/sample 1 h and 13 min.

The soil-slag samples were characterized by X-Ray Fluorescence (XRF) (INNOV-X-SYSTEMS ALPHA-4000) for a quantitative determination of major and trace element concentrations in soil material using a calibration with matrix-matched standards.

The pH of the soil and slag samples was determined with a multi-parameter analyser CONSORT C 533. The pH was measured in solution with weight ratio soil / slag: distilled water 1: 5, decantation for 24 h and filtration.

The humidity, U, of the soil-slag samples was calculated by Eq. (1) according with Standard SR 648 2002.

where m is the mass of the sample taken in determination, in grams, m1 is mass of sample remaining after drying for two hours at 105 °C, in grams.

The porosity of soil is the volume of space in between the mineral particles of soil. The total porosity, PT, of the soil-slag samples was calculated by Eq. (2).

where D is the density and DA is the apparent density of the soil-slag samples taken in determination in a graded cylinder.

Soil pH is a very important parameter because it plays an important role in the mobility of heavy metals, and an acidic pH is accompanied by dissolution processes of minerals and hydrated Fe, Mn and Al oxides on which heavy metal ions are adsorbed. The pH and its changes undoubtedly play a significant role of the soil environment because the heavy metals may become easily available to plants. The agricultural land resources are an issue worldwide and through this investigative study we showed that the mixture of blast furnace slag and waste slag dumped in landfill can help remediation of the soil acidity. The obtained results of the new slag mixture support the improvement of acid soils with positive effects on the characteristics and qualities of the soil. By using a precent of the slag waste combining with granulated slag can solve two current issues, one by disposal of landfilled slag wastes and the second one is to make them useful in the acid soils amelioration process. If we consider the cost–benefit analysis of the future environment in terms of landfills, the quality of human health of the population is more substantial that is not measured financially.

The results from this study together with large scale environmental issues poses significant long for further studies which consist in eco-toxicity tests of slag-soils mixtures on the adsorption and immobilization of potential toxic elements from soil for sustainable agriculture.

All data analysed during this study are included in this published article and its supplementary information files.

Das, S., Kim, G. W., Hwang, H. Y., Verma, P. P. & Kim, P. J. Cropping with slag to ad-dress soil, environment and food security. Front. Microbiol. 10, 1320 (2019).

Article Google Scholar

Mavroudis, I. et al. A voxel-wise meta-analysis on the cerebellum in essential tremor. Med. Lith. 57, 264 (2021).

Google Scholar

Statescu, C., Honceriu, C., Jurcau, R. N. & Trus, C. An original study on the correlations between magnesium and depression and their cardiovascular relevance. Rev. Chim. 70, 4102–4104 (2019).

Article CAS Google Scholar

Statescu, C., Honceriu, C. & Trus, C. Does magnesium deficient diet and its associated metabolic dysfunctions induces anxiety-like symptoms further cardiovascular relevance. Rev. Chim. 70, 3579–3581 (2019).

Article CAS Google Scholar

Montenegro-Cooper, J. M., Celemin-Matachana, M., Canizal, J. & Gonzalez, J. J. Study of the expansive behavior of ladle furnace slag and its mixture with low quality natural soils. Constr. Build. Mater. 203, 201–209 (2019).

Article CAS Google Scholar

Sas, W., Głuchowski, A., Radziemska, M., Dzięcioł, J. & Szymański, A. Environmental and geotechnical assessment of the steel slags as a material for road structure. Materials 8, 4857–4875 (2015).

Article ADS CAS Google Scholar

Ayala, J. & Fernandez, B. Recovery of manganese from silicomanganese slag by means of a hydrometallurgical process. Hydrometallurgy 158, 68–73 (2015).

Article CAS Google Scholar

Koros, P. J. Dusts, scale, slags, sludges… Not wastes, but sources of profits. Metall. Mater. Trans. B 34, 769–779 (2003).

Article Google Scholar

Faisal, A. A. H., Alquzweeni, S. S., Naji, L. A. & Naushad, M. Predominant mechanisms in the treatment of wastewater due to interaction of benzaldehyde and iron slag by-product. Int. J. Env. Res. Pub. He 17, 226 (2020).

Article CAS Google Scholar

Santamaria, A., Gonzalez, J. J., Losanez, M. M., Skaf, M. & Ortega-Lopez, V. The design of self-compacting structural mortar containing steelmaking slags as aggregate. Cement Concrete Comp. 111, 103627 (2020).

Article CAS Google Scholar

Buruiana, D. L., Obreja, C.-D., Herbei, E.-E. & Ghisman, V. Re-use of silico-manganese slag. Sustainability 13, 11771 (2021).

Article CAS Google Scholar

Obiri-Nyarko, F. Ameliorating soil acidity in Ghana: A concise review of apoaches. ARPN J. Sci. Technol. 2, 143 (2012).

Google Scholar

Bolan, N. S., Adriano, D. C. & Curtin, D. Soil acidification and liming; Interactions with nutrient and heavy metal transformation and biavailability. Adv. Agron. 78, 215 (2003).

Article CAS Google Scholar

Fujisawa, N. et al. Structural alterations of humic acid fractions in a steel slag-compost fertilizer during fertilization. Analysis by pyrolysis/methylation-gas chromatography/mass spectrometry. J. Anal. Appl. Pyrolysis 95, 126–133 (2012).

Article CAS Google Scholar

Gómez-Nubla, L., Aramendia, J., De Vallejuelo, S.F.-O., Carrero, J. A. & Madariaga, J. M. Focused ultrasound energy over steel slags as a fast tool to assess their environmental risk before and after their reuse in agriculture and civil constructions. Microchem. J. 132, 268–273 (2017).

Article Google Scholar

Wen, T. et al. Effect of basic oxygen furnace slag on succession of the bacterial community and immobilization of various metal ions in acidic contaminated mine soil. J. Hazard. Mater. 388, 121784 (2020).

Article CAS Google Scholar

Popescu, L. et al. Assesment on LF slags characteristics used for agricultural acidic soils improvement. Rev. Romana Mater. Rom. J. Mater. 44, 141–146 (2014).

CAS Google Scholar

Anger, I. et al. Impact of metallurgical ladle furnace slag on acid soil remediation in agriculture. Rev. Romana Mater. Rom. J. Mater. 48, 76–82 (2018).

CAS Google Scholar

Mihalache, M., Ilie, L., Marin, D.I., Bolohan, C., Ulmanu, M., Anger, I., & Gamenț, E.: Research regarding acid soils improvement using a waste from metallurgy. Analele Universităţii din Craiova, seria Agricultură – Montanologie – Cadastru (Annals of the University of Craiova - Agriculture, Montanology, Cadastre Series) Vol. XLIII (2013).

Fan, Y., Li, Y., Li, H. & Cheng, F. Evaluating heavy metal accumulation and potential risks in soil-plant systems applied with magnesium slag-based fertilizer. Chemosphere 197, 382–388 (2018).

Article ADS CAS Google Scholar

Díaz-Piloneta, M., Ortega-Fernández, F., Terrados-Cristos, M. & Álvarez-Cabal, J. V. Application of steel slag for degraded land remediation. Land 11, 224 (2022).

Article Google Scholar

EUR-LEX. Directive (EU) 2018/851 of the European Parliament and of the Council of 30 May 2018 Amending Directive 2008/98/EC on Waste (Text with EEA Relevance). Available online: https://eur-lex.europa.eu/legalcontent/EN/TXT/?uri=uriserv:OJ.L_.2018.150.01.0109.01.ENG (accessed on 1 November 2021).

Ning, D., Liang, Y., Liu, Z., Xiao, J. & Duan, A. Impacts of steel-slag-based silicate fertilizer on soil acidity and silicon availability and metals-immobilization in a paddy soil. PLoS ONE 11(12), e0168163 (2016).

Article Google Scholar

Yang, L. Y. et al. Steel slag as low-cost adsorbent for the removal of phenanthrene and naphthalene. Adsorpt. Sci. Technol. 36, 1160–1177 (2018).

Article CAS Google Scholar

Wang, S., Peng, X., Geng, J., Li, B. & Wang, K. Synthesis of calcium silicate hydrate based on steel slag with various alkalinities. J. Wuhan Univ. Technol. 29, 789–794 (2014).

Article CAS Google Scholar

Mozgawa, W. & Deja, J. Spectroscopic studies of alkaline activated slag geopolimers. J. Mol. Struct. 924–926, 434–441 (2009).

Article ADS Google Scholar

Konečny, P. et al. Composition of gypsum from the Kobe rice quarry (Czech Republic). Acta Geodyn. Geomater. 8, 145–156 (2011).

Google Scholar

Fernández-Carrasco, L., Torrens-Martín, D., Morales, L.M., & Martínez-Ramírez, S.: In-frared spectroscopy in the analysis of building and construction materials, in: Prof. Theophanides Theophile (Ed.), Infrared spectroscopy-materials science, engineering and technology, InTech, 2012, Available from http://www.intechopen.com/books/infrared-spectroscopy-materials-scienceengineering-and-technology/infrared-spectroscopy-of-cementitiousmaterials

Navarro, C., Díaz, M. & Villa-García, M. A. Physico-chemical characterization of steel slag. Study of its behavior under simulated environmental conditions. Environ. Sci. Technol 44, 5383 (2010).

Article ADS CAS Google Scholar

Jiang, Y., Ling, T.-C., Shi, C. & Pan, S.-Y. Characteristics of steel slags and their use in cement and concrete—A review. Resour. Conserv. Recycl. 136, 187–197 (2018).

Article CAS Google Scholar

Partal, E., Dima, F. M., Paraschivu, M. & Cotuna, O. J. Fertilization effects on maize crop in the context of climate change. Rom. Agric. Res. 38, 357–362 (2021).

Google Scholar

Download references

This research was supported by the project ”Excellence and involvement in intelligent development based on research and innovation at the ”Dunarea de Jos” University of Galati—DINAMIC”, ID 536/2021. The authors thanks to the management of Liberty Steel Company of Galati for the support according with the signed protocol for postdoctoral studies.

Interdisciplinary Research Centre in the Field of Eco-Nano Technology and Advance Mate-Rials CC-ITI, Faculty of Engineering, “Dunarea de Jos” University of Galati, 47 Domneasca, 800008, Galati, Romania

Viorica Ghisman, Alina Crina Muresan & Daniela Laura Buruiana

Medicine and Pharmacy Faculty, “Dunarea de Jos” University of Galati, 47 Domneasca, 800008, Galati, Romania

Elena Roxana Axente

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

Conceptualization: [V.G. and D.L.B.]; Methodology: [V.G. and D.L.B.]; Formal analysis and investigation: [A.C.M. and E.R.A.; Writing—original draft preparation: [V.G. and D.L.B.]. All authors reviewed the manuscript.

Correspondence to Daniela Laura Buruiana.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Ghisman, V., Muresan, A.C., Buruiana, D.L. et al. Waste slag benefits for correction of soil acidity. Sci Rep 12, 16042 (2022). https://doi.org/10.1038/s41598-022-20528-6

Download citation

Received: 31 May 2022

Accepted: 14 September 2022

Published: 26 September 2022

DOI: https://doi.org/10.1038/s41598-022-20528-6

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

Gesunde Pflanzen (2023)

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.